EMScanner
High speed 8GHz Real-time EMC and EMI
Diagnostic Tool On Your Lab-Bench
Very-Near-Field EMI/EMC Scanning Device
EMScanner is a self-contained very-near-field scanning device which connects to a spectrum analyzer or a desktop PC running a copy of EMScanner Software. The EMScanner system operates from 150 kHz to 8 GHz and delivers repeatable and reliable results that pinpoint the cause of design failure in seconds.
Why EMScanner?
With EMScanner design teams can personally test their designs without having to rely on another department, test engineer, or time-consuming off-site testing. After diagnosing even an intermittent problem, the engineer can implement a design change and retest, and the results provide concrete verification of the effectiveness (or not) of the design change.
EMScanner diagnostic capabilities allow design teams to reduce testing time by more than two orders of magnitude. Users have also documented fifty percent reductions in design cycle times.
Ideal PCB projects for EMScanner are boards designed for high speed, high power, and/or high density/complexity. Any PCB that places a premium on board real-estate also qualifies as an excellent candidate.
The compact, flat scanner provides PCB design teams with an easy-to-use, cost effective, and proven tabletop solution. Emission, immunity, filtering, EMI shielding, broadband noise and Common Mode testing are some of the applications that the EMScanner system addresses in mere seconds.
Product Features
Capability
Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines and report generation.
Spatial scan time
Continuous real-time or sub-second single scan for entire scan area Dependent on spectrum analyzer performance.
Sprectal scan time
45 seconds for L 10 cm x W 10 cm (L 4” x W 4”) PCB with a 100 MHz span and 100 kHz RBW. Scanning area, span and RBW are user selectable within spectrum analyzer specifications.
Windows 10®
Supported CAD Overlays
Standard Gerber© RS274x format and HPGL format
Supported
operating system
EMScanner Demo Videos
Product Specification
Broadband frequency coverage:
EMS8000 – Base configuration = 150 kHz to 8 GHz
Antenna array:
1,218 (42 x 29) H-field probes Measurement sensitivity: Dependent on spectrum analyser performance
Spatial resolution:
Probe spacing of 7.5 mm with an ‘effective’ resolution of 3.75 mm
Scan area:
L 31.6 cm x W 21.8 cm (L 12.44” x W 8.58”)
Frequency accuracy of peaks:
Peak marking accuracy of spectrum analyser
Probe to probe uniformity:
Calibrated before shipment. Firmware correction factors adjust for frequency dependant probe responses with +/- 3 dB accuracy
Measurement plane isolation:
> 20 dB
Maximum radiated power load:
10 W / 40 dBm
Enclosure:
Anodized non-conductive metal
Maximum DUT voltage:
Glass Cover: 4kV DC; 2.6kV AC | Metal Case: 260V DC; 200V AC (measured as dielectric withstanding voltage – DWV)
Operating temperature:
From 15⁰ C to 40⁰ C (continuous spectral and spatial scans at 50 MHz)
In situ scanning:
6U Size C scanner fits into VXI and VME chassis
Scanner connections:
Spectrum analyser: RF SMA to type N coaxial cable | Adaptor: Proprietary DB25
Dimensions of the scanner:
L 39.2 cm x W 24.4 cm x H 1.7 cm (L 15.43” x W 9.61” x H 0.67”)
Weight:
2.80 Kg / 6.17 lb (including cables and the adaptor)
Keysight Supported SA`s:
N9000A – CXA – A11.04
N9000A – CXA – A14.60
N9000B – CXA – A19.05
N9000B – CXA – A19.05
N9010A – EXA – A11.03
N9010A – EXA – A12.13
N9010B – EXA – A19.05
N9010B – EXA – A19.05
N9020B – MXA – A19.05
N9020A – MXA – A11.03
N9020A – MXA – A12.13
N9038A – MXE – A.08.03
N9038A – MXE – A.12.13
N9912A – FieldFox – A.6.19-RC2
N9912A – FieldFox – A.07.75
N9912A – FieldFox – A.09.57
N9916A – FieldFox – A.08.10
N9916A – FieldFox – A.6.19-RC2