SCORPION
The 2in1 Vertical Take-off Reconnaissance UAV
The Next Generation
SCORPION
of eVTOL UAVs
It is not only the optics that the Scorpion has in common with its animal fellow. Like the Vector it is also optimized for use in adverse conditions with extreme temperatures.
The centerpiece is identical to the fixed-wing Vector UAV housing gimbal, autopilot and data link. The larger propellers and motors of Scorpion make it a state of the art tri-copter with live video data link for various mission scenarios.
The Scorpion impresses with the same HD data link with an operating range of up to 15+ km.
As a tri-copter, it is ideal for smaller-scale and stationary use, for example in densely built-up areas. With a flight time of 35 minutes, it can cover a wide range of applications. Coming with the built-in 2in1 ability to always convert back to the Vector UAV, the Scorpion’s core features are:
-
State of the art Tri-Copter UAV
-
0-15 m/s cruise speed
-
Up to 35 min flight time (depends on the payload)
The 2in1 System - The best of both worlds
Vector
Fixed Wing Design
SCORPION
Tri-Copter Design
eVTOL UAS with extended flight time
Intuitive planning and execution
AES-Encrypted mesh IP data link
Max. Take-off Weight < 5 kg | < 11 lb
Max. Flight Time Up to 35 minutes
Command and Control Range 15+ km (handheld unit); 25+ km (sector antennas)
Payload HD40-XV EO 800 g & HD40-LV EO/IR 550 g &
NightHawk2 EO/IR 320 g
Cruise Speed 0 – 15 m/s | 0 – 29 kn
Wind Resistance max. 10 m/s
Wingspan 1.37 m | 4.5 ft.
Transport Case Dimension 0.85 x 0.47 x .028 m
The Features
QBASE 3D – C2 MISSION SOFTWARE
Thanks to QBase 3D, all mission relevant steps from planning to execution can be carried out intuitively by a single person. QBase 3D automatically generates efficient flight paths after the flight area and the mission parameters have been defined with a few clicks. It is also possible to launch Vector or Scorpion without having planned a mission beforehand in order to be operational quickly.
Our self-developed software allows you to dynamically adjust the mission in flight to mark targets on the map or in video before, during or after the mission, to show or detect critical points.
QBase 3D records the full mission on the GCS (including video and aircraft data) and replays it at any time, while recording is continued. The software supports the operator with warnings when the aircraft is about to exceed its limits. Overwriting them is always possible if the mission requires it – Just fly.
